
Receive Multi Coupler Units

For use in receive distribution systems, where low noise and high dynamic range
are important for distributing weak and strong signal from
one antenna system to many receivers.
HF band coverage 0.1MHz – 100 MHz
Burnout protected - Low noise amplifier
High dynamic range - High Isolation


SPECIFICATIONS
For Receive Multi Coupler Unit
|
Model No.: |
6008/L |
|
Number of outputs: |
4 |
|
Frequency range: |
0.1 - 100 MHz |
|
Gain setting: |
-7 to +3 dB |
|
Amplitude flatness: |
±1dB |
|
Noise figure (@max gain setting): |
5dB |
|
Output intercept point -2nd order: |
+29dBm |
|
Output intercept point -3rd order: |
+19dBm |
|
Output for rated OIPs: |
+5dBm |
|
SWR input/output (50 W): |
<1.5:1 |
|
Isolation -Output to input: -Output to output: |
>25dB 35dB Typ. |
|
Maximum input signal -CW: -Pulse: |
0.5Watt 5Watts @t < 10seconds |
|
Power Supply: -AC power: -Fall back supply: |
230V±10% @50 - 60 Hz 12VDC (Isolated) |
|
Max power consumption: -AC power -DC power |
5Watts 10Watts |
|
Connectors: -RF input/output -Power AC -Power DC |
N,BNC,TNC or UHF sockets IEC plug Screw Terminal Block |
|
Dimensions: -With: -Depth: -Height: |
483mm (19”) 275mm (10.8”) 44mm (1.75”), 1unit |
|
Temperature -Operating -Storage |
0 to 70°C -20 to 90°C |
|
Options:
|
Band Pass, Low Pass or High Pass filters 110V±10% @50 - 60 Hz 24 Volt Fall back supply Output bypass relay |
21.10.2004
Comm-connect reserve the rights to amend prices and specifications without prior notice
Datasheet
Download this datasheet
Modified 19-11-2004