
Digital Video Broadcast Terrestrial
Repeater

For use in areas where DVB-T signal is obstructed by terrain or otherwise needs boosting.
Easy installation and start up.
Adjustment by built-in level monitors.
UHF Band IV and V
Channel filter and low noise amplifier
High dynamic range, adjustable PRE distortion

SPECIFICATIONS
|
Model No.: |
5502 |
|
Frequency range: IN/OUT |
470 – 860 MHz |
|
Bandwidth: –1dB |
±4MHz |
|
Bandwidth: -30dB (CH21) |
±10MHz |
|
Input range: (50mW output) |
-73dBm to -33dBm |
|
Amplitude flatness: |
±0.25dB |
|
Noise figure Amplifier: |
<2.5dB NF |
|
Noise figure System: |
<4dB NF |
|
Output Power (DVB-T): |
0.1 Watt |
|
Output Power P 1dB: |
1 Watt |
|
SWR input/output (50 W): |
<1.5:1 |
|
PA Control on/off (adjustable carrier level) |
0dBm |
|
Power Supply: -AC power: |
230V±10% @50 - 60 Hz |
|
Max power consumption: -AC |
70V/A |
|
Connectors: -RF input/output -Power AC in -Power AC out for PA |
N sockets IEC plug IEC jack |
|
Dimensions: -Width: -Depth: -Height: |
482.5mm 350mm 88mm |
|
Temperature: -Operating -Storage |
5 to 50°C -20 to 90°C |
|
Colour: -standard |
Natural Elox. |
|
Options: -Output Filter -External PA |
-1dB ±4MHz 100Watt (10W DVB-T) |
21.10.2004
Comm-connect reserve the rights to amend prices and specifications without prior notice
Datasheet
Download this datasheet
Modified 19-11-2004