
Low Noise Amplifiers

For use in receive antenna systems where single band low noise amplification is needed.
Broad band coverage 118MHz – 2400MHz models
GaAs Fet technology
Low noise
High dynamic range
Burnout protected

VHF Low Noise Amplifier
SPECIFICATIONS
|
Model No.: |
4014 |
|
Frequency range: Specify f0 |
118 - 174 MHz |
|
Gain setting: |
+10 to +20 dB |
|
Amplitude flatness ±5MHz: |
±1dB |
|
Noise figure (@max gain setting): |
<1dB |
|
P1dB: |
+15dBm |
|
Output intercept point -2nd order: |
+29dBm |
|
Output intercept point -3rd order: |
+19dBm |
|
Output for rated OIPs: |
+5dBm |
|
SWR input/output (50 W): |
<2:1 |
|
Isolation -Output to input: |
>25dB |
|
Maximum input signal -CW: -Pulse: |
0.5Watt 5Watts @t < 10seconds |
|
Power Supply: -DC power: |
12Volt |
|
Max power consumption: -DC power: |
100mA |
|
Connectors: -RF input/output -Power DC |
N,BNC,TNC or UHF sockets Solder Feed through Terminal |
|
Dimensions: -With: -Depth: -Height: |
152mm (6”) 137mm (5.4”) 35mm (1.4”) |
|
Temperature: -Operating -Storage |
0 to 70°C -20 to 90°C |
|
Options:
|
5Volt 24 Volt Adjustable |
21.10.2004
Comm-connect reserve the rights to amend prices and specifications without prior notice
Datasheet
Download this datasheet
Modified 19-11-2004